Step 2: Connect the Motion and Light Sensor with the application

To connect the Motion and Light Sensor with the application, follow the steps below:

1. Log in to the application by entering the registered Email and Password.

2. Tap on the + icon located in the top-right corner of the home screen.

3. If the MHub isn’t already connected, a popup displays to connect the MHub.

4. From the Add New popup, select Device.

5. From the Select Device list, tap on the Sensors to expand the section and select Motion Sensor.

6. If the Motion and Light Sensor is not available for connection, press and hold the power button at the bottom of the device for 5 seconds to make it available (indicated by the blinking green light for 60 seconds).

7. Ensure the device’s wireless mesh is turned on to form the connection. If not, the application prompts you to turn it on.

8. A prompt displays once a sensor is found in the network and is ready to pair. Tap on the Pair button to initiate pairing.

The application undergoes a few steps to complete the pairing.

9. Once the sensor is successfully paired, tap on the Next button.

10. Enter a name (maximum 26 characters) for the sensor and tap on the Save button.

11. Allow a few seconds for the Motion and Light Sensor to become accessible through the application.