| Safety Instructions: – Ensure there are appropriate fuse/circuit breakers installed for the space and turn them off before installation. Turn them on only after the installation is done. – Tighten or loosen the screws when no Live wire is connected. – Operate the device only within indoor environments to keep it sheltered from all weather conditions. – Do not allow children to play with the device or its packaging as its plastic film and small components may pose a choking hazard to them. |
To power your LCD Touch Panel, follow the steps below:
1. Switch off the AC supply from the fuse/circuit breaker.
2. Connect the wires as shown in the figure below.
3. Remove the glass top of the panel by inserting the tip of a slotted screwdriver into the casing locks at the bottom.
4. With the help of a cross-slot screwdriver, fix the panel on the wall using mounting screws.
5. Connect the LCD part back by connecting it with the back casing.
6. Switch on the AC supply for the panel and wait for at least 30 seconds for a proper operation.
7. Follow the steps in the next section to connect your LCD Touch Panel with the application.