| Safety Instructions: – Ensure there are appropriate fuse/circuit breakers installed for the space and turn them off before installation. Turn them on only after the installation is done. – Tighten or loosen the screws when no Live wire is connected. – Operate the device only within indoor environments to keep it sheltered from all weather conditions. – Do not allow children to play with the device or its packaging, as its plastic film and small components may pose a choking hazard to them. |
To power the Smart Siren, follow the steps below:
1. Switch off the AC supply from the circuit breaker.
2. Connect the wires of the sirens with the L1 and L2, respectively.
Note: Smart Siren can support connection with up to two sirens at a time.
3. Connect the Live Wire in L and the Neutral wire in N.
4. Using a cross-slot screwdriver, tighten all the connections.
5. Turn on the AC supply from the circuit breaker.
The controller is ready for connection as soon as it’s powered.
6. Follow the steps in the next section to connect the Smart Siren with the application.