To connect the Smart Relay with the application, follow the steps below:
1. Log in to the application by entering the registered Email and Password.
2. Tap on the + icon in the top-right corner of the home screen.
3. If the MHub isn’t already connected, a popup displays to connect the MHub.
4. From the Add new popup, select Device.
5. From the Select Device list, select Smart Relay.
6. Ensure the device’s wireless mesh is turned on to form the connection. If not, the application prompts you to turn it on.
A prompt displays once a Smart Relay is found in the network and is ready to pair.
7. If the Smart Relay is not available for connection, press and hold the device’s power button for 5 seconds to make it available.
8. Tap on the Pair button to pair the Smart Relay.
The application undergoes a few steps to complete the pairing.
9. Once the Smart Relay is successfully paired, tap on the Next button.
10. Enter a name (maximum 26 characters) for the Smart Relay and tap on the Save button.
11. Wait for a few seconds to make the Smart Relay accessible through the application.
Once the Smart Relay is successfully connected with the application, close the switchboard using screws.